菱泰企業有限公司

Aluminium Box

?Introduction

Aluminium enclosures with external mounting ?anges
Used for electrical and electronic equipment installation, connection and control components of metal shell
Suitable for industrial, automotive, railway, Marine, tunnels, parking lots, industrial workshop etc
The shell conforms to the low voltage directive 2006/95 / EC, EMC directive 2004/108 / EC (if applicable) and the following criteria:
EN 60670-1 for household and similar fixed electrical installation of the application of electrical accessories: box and the shell
EN 60670-22 the special requirements of the connection box and the shell
EN 62208 fit for low voltage switchgear and control equipment components of an empty shell
NEMA 250 national electrical manufacturers association (American). Protection grade classification (type)
High mechanical strength and vibration resistance
Set screw
High magnetic field interference protection
Anti-aging material, water resistant, oil resistant, oil resistant, resistant to oil
The shell can be through the use of external flange or internal hole for installation
Inside the box body, as the attachment is provided by the DIN rail or metal plate can be used for installation of DIN rail terminal blocks, as attachments to provide or metal plate can be used to install, circuit breaker, fuse block, terminal control device, transformer, electronic circuit, connectors, etc
Can provide six series
1. With a standard white color aluminum RAL9006 polyester powder coating
2. The standard gray RAL7035 with polyester powder coating
3. The standard gray RAL7037 with polyester powder coating
4. Sandblasting, no coating
5. EMC series: sandblasting, no coating
6. Can be used in harsh environment and HE is as high as 210 ° C high temperature environment type black RAL9005 with polyester powder coating
HE series of shell in the adapter the MIC connector series of HE shell has the best performance: the performance column in WESTEC total directory.
Provides eight kinds of specifications
From the 90 * 90 * 53 mm, specification 1 (S1)
392 * 298 * 298 mm, size 7 (S7)
Specifications of S - 3 with extended cover (HC)
According to EN 60529 standard protection grade: IP66
Depending on the type of protection grade: 250 standard NEMA 4 x, 12, 13
Type 4 x, a coating surface
Working temperature: - present 40 ° C + 125 ° C (210 ° C) HE types
And lid with a grounding terminal box, by using screw can achieve better grounding connection and low resistance
No coating internal can ensure that the internal surface of electrical conductivity, in order to achieve better grounding protection
material
Main body and the lid; Die casting aluminum alloy
Color: type STD RAL9006 white aluminum color
RAL 7035 type STD gray
RAL 7037 type STD gray
Black type HE RAL 9005
Sand type, natural aluminum metal color
Spraying: polyester powder
Washer: anti-aging, oil resistant, resistant to oil and fuel made from silicon
Screw: can with anti-corrosion GEOMET @ processing of steel, especially in the aluminum parts contact
Galvanized steel qualitative screw is suitable for internal used
Metal plate: galvanized steel
 


 

Aluminium enclosures for industrial purpose


Used for installation of electrical and electronic equipment circuit breaker, connections and control components of metal shell

Can be adapted to use in mechanical and electromechanical industry, industrial automation, automobile, rail, Marine, tunnels, parking lot, industrial workshop etc

The shell conforms to the low voltage directive 2006/95 / EC, EMC directive 2004/108 / EC (if applicable) and the following criteria:

EN 62208 fit for low voltage switchgear and control equipment components of an empty shell

NEMA 250 national electrical manufacturers association (American). Protection grade classification (type)

DIN 40050-9 / ISO 20653 road vehicles in the electrical equipment. The shell. High pressure water test. IP69K

NEMA ICS5 food and beverage industry. The independent control circuit components of high pressure cleaning power test program

High mechanical strength and shock resistance

Set screw

High magnetic field interference protection

Anti-aging material, water resistant, oil resistant, oil resistant, resistant to oil

The shell can be installed through internal hole

Inside the box body, DIN rail or metal installation panel is optional, can be used to install, circuit breaker, fuse block, terminal control device, transformer, electronic circuit, connector, etc.

Can provide five series

1 standard grey RAL7001 with polyester powder coating

At the end of the 2 with polyamide coating standard grey RAL7035

3 standard sandblasting, no coating.

4 EMC series, sandblasting, no coating

5 can be used in harsh environment and HE is as high as 210 ° C high temperature environment type black RAL9005 with polyester powder coating

HE series shell in adaptation MIC even machine HE series shell has the best performance: the performance in WESTEC total directory.

According to EN 60529 standard protection grade: IP66

According to the DIN40050-9 standard protection grade: IP69

Depending on the type of protection grade: 250 standard NEMA 4 X, 4 X 12, 13 types, apply a coating surface

According to the NEMA standard level of resistance to impact: 62262 IK09

Working temperature: - present 40 ° C + 125 ° C (210 ° C) HE types

Maximum temperature: 75 ° C

More than 24 hours average temperature: 60 ° C

At 25 ° C maximum relative humidity: 100%

At 40 ° C maximum humidity: 50%

With the earthing terminal box body and the lid material

Metal material box body and the lid: die casting aluminum alloy

Coating: polyester powder coating

Washer: anti-aging, oil resistance, resistance to fuel made from silicon

Bolt: stainless steel

 

Compact Catalogue 2011



ProductsProduct
04年福彩3d走势图