菱泰企業有限公司

Multiple Industrial Connectors

?Introduction

1) A wide range of accessories comprising of: cable glands, fittings for flexible conduits, blanking plugs, enlargers, reducers and lock units.

2) Threaded cable passage in various Pg and metric thread (in accordance with EN 60423) available, for cable entry devices in accordance with EN 50262, as option located vertically, horizontally or at the front. NPT threads on request.

3) Heavy duty enclosures in die-cast aluminium alloy or self-extinguishing thermoplastic. Surface mounting or bulkhead housings and hoods are available, with or without fixed covers or with mobile protection covers. The enclosures for the use at a voltage of 500V have two tabs that prevents the insertion of inserts for the use with 830V. Those for the use with a rated voltage of 830V do not have any tabs and supplementary insulating strips are applied.

4) Metal enclosures with polyester or epoxy powder coating with high resistance to mechanical stress and external agents, Enclosures used for harsh environments have cromate treatment before coating. Certified UL/CSA.

5) Insert in self-extinguishing thermoplastic material reinforced with glass fibres, UL approved, with a limit working temperature from – 40°C to + 125°C.

6) Inserts with asymmetric guide rails for preventing incorrect coupling, The inserts have a mechanical duration equal to or over 500 mating / unmating cycles.

7) Inserts manufactured to conform with EN 61984, VDE 0110, VDE 0627, EN 175301-801, UL 1977 standards. They are certified and labelled with the UL and CSA marks.

8) Special seal gaskets in anti-ageing, oil-resistant and fuel resistant vinyl nitrile elastomer (NBR) together with the joints provide an IP66 degree of protection for coupled connectors.

9) Monoblock galvanized steel or stainless steel or self-extinguishing glass filled thermoplastic material locking levers guarantee a perfect closure and sealing.

10) Locking device available in 3 versions, simple (with one lever) or double (with two levers) or with screws HP-HE series.

11) Captive insert fastening screws, with anti-loosening flexible washer.

12) Contacts position identified with numbers on both sides of each insert, laser printed or moulded.

13) Contacts in silver or gold-plated copper alloy with connection to the conductors made via captive screws, crimping terminals, spring terminals or screws with incorporated terminal block.

14) Earth terminal with wide contact surface.

15) Stainless steel pegs that facilitate the locking and eliminate damages.

16) Captive contact screws, stainless steel wire protector.

17) CE marking attesting the conformity to the requirements of the Directive Low Voltage Device (LVD) 2006/95/EC.

 



Catalogue 6 Multiple Industrial Connectors




04年福彩3d走势图